FACT FEDO Engineer & Draughtsman Recruitment 2026: 34 Posts
📅 Posted: 07/05/2026 📝 Updated: 08/05/2026
Total Vacancy34
Salary₹25,750–₹67,240/Month Consolidated (Based on Post & Experience)
LocationAll India
Last Date21/05/2026
Short Information: The Fertilisers and Chemicals Travancore Limited (FACT), a Schedule 'A' Central PSU under the Ministry of Chemicals and Fertilizers, is building a panel for temporary contract engagement in FACT Engineering and Design Organisation (FEDO) against 34 different posts — ranging from Draughtsman (Diploma holders) to Assistant General Manager (senior engineers with 12–15 years experience) — across disciplines including Chemical, Mechanical-Piping, Electrical, Instrumentation, and Civil Engineering.
The consolidated pay is attractive and experience-linked: Draughtsman starts at ₹25,750/month (1-year experience) and goes up to ₹34,650/month (5-year experience). Engineers start at ₹35,520/month, Deputy Managers at ₹40,000/month, Senior Managers at ₹43,720–₹46,400/month, and Assistant General Managers at ₹49,240–₹53,820/month, with a maximum pay ceiling of ₹67,240/month for AGMs with 15-year experience. An annual 3% increment applies on contract renewal.
Applications must be submitted online via www.fact.co.in by 4:00 PM on 21 May 2026, followed by sending the signed hard copy with documents by Speed Post/Registered Post to reach FACT Udyogamandal by 28 May 2026. Eligibility date for age and experience is 01 May 2026. This is a contract engagement — not permanent — for 1 year or till project completion, whichever is earlier.
Application Ends In:
Calculating...
Quick Navigation:
FACT FEDO Engineer Draughtsman Recruitment 2026 2026Important Dates
| Notification Released | 07/05/2026 |
| Application Begin (Online) | 07/05/2026 |
| Last Date to Submit Online Form | 21/05/2026 (by 4:00 PM) |
| Last Date for Hard Copy Receipt at FACT | 28/05/2026 |
| Eligibility Determination Date (Age & Experience) | 01/05/2026 |
| Skill Test / Interview Date | To be notified |
FACT FEDO Engineer Draughtsman Recruitment 2026 2026Application Fee
| All Candidates | ₹0 |
Payment: No fee applicable — Free to apply
FACT FEDO Engineer & Draughtsman Recruitment 2026: 34 PostsVacancy Details & Age Limit
Age Limit: Draughtsman / Engineer / Deputy Manager (Post Codes 1–5, 7–20): Max 35 Years | Senior Draughtsman / Senior Manager (Post Codes 6, 21–27): Max 45 Years | Assistant General Manager (Post Codes 28–34): Max 50 Years (All ages as on 01/05/2026)
(SC / ST / OBC / EWS / PwBD: Age relaxation as per Government of India directives for reserved posts., Age eligibility determined as on 01/05/2026.)
| Post Code | Post Name | Qualification | Min. Experience | Consolidated Pay (₹/Month) |
|---|---|---|---|---|
| 1 | Draughtsman (Chemical) | Diploma in Chemical Engineering | 1 / 2 / 3 / 5 Years in Design & Drafting (PFDs, P&IDs) using AutoCAD | ₹25,750 – ₹29,000 |
| 2 | Draughtsman (Mechanical-Piping) | Diploma in Mechanical Engineering | 1 / 2 / 3 / 5 Years in Piping Drawings, Layouts, Isometrics using AutoCAD | ₹25,750 – ₹29,000 |
| 3 | Draughtsman (Electrical) | Diploma in Electrical / Electrical & Electronics Engineering | 1 / 2 / 3 / 5 Years in SLD, Power Layout, Earthing Layout using CAD | ₹25,750 – ₹29,000 |
| 4 | Draughtsman (Instrumentation) | Diploma in Instrumentation / Instrumentation & Control / Electronics & Instrumentation | 1 / 2 / 3 / 5 Years in Engineering Drawings using CAD, BOQ for Erection Tenders | ₹25,750 – ₹29,000 |
| 5 | Draughtsman (Civil) | Diploma in Civil Engineering / Architecture | 1 / 2 / 3 / 5 Years in Civil/Structural Drawings of RCC/Steel Structures using CAD | ₹25,750 – ₹29,000 |
| 6 | Sr. Draughtsman (Civil) | Diploma in Civil Engineering / Architecture | 8 / 10 Years in Civil/Structural Drawings of RCC/Steel Structures using CAD | ₹31,700 – ₹34,650 |
| 7 | Engineer Design (Process) | Degree in Chemical / Petrochemical / Chemical Technology / Polymer Technology | 1 / 2 / 3 Years in Process Design, PFDs, P&IDs — Oil & Gas / Fertiliser / CBG / Green Hydrogen | ₹35,520 – ₹37,690 |
| 8 | Engineer (Design Piping) | Degree in Mechanical Engineering | 1 / 2 / 3 Years in Piping Layouts, Isometrics, MTO, ASME B31.3 | ₹35,520 – ₹37,690 |
| 9 | Engineer (Design Mechanical) | Degree in Mechanical Engineering | 1 / 2 / 3 Years in Design Consultancy / EPC — Pumps, Compressors, Procurement Specs | ₹35,520 – ₹37,690 |
| 10 | Engineer Design (Electrical) | Degree in Electrical / Electrical & Electronics / Electrical & Instrumentation Engineering | 1 / 2 / 3 Years in EHV/HV Power Distribution Design, Earthing, Lighting, BOQ using AutoCAD | ₹35,520 – ₹37,690 |
| 11 | Engineer Design (Instrumentation) | Degree in Instrumentation / Instrumentation & Control / Electronics & Instrumentation | 1 / 2 / 3 Years in Instrumentation System Design, Control Systems, BOQ | ₹35,520 – ₹37,690 |
| 12 | Engineer Design (Civil) | Degree in Civil Engineering | 1 / 2 / 3 Years in Structural Design of RCC/Steel using STAAD-Pro or ETABS | ₹35,520 – ₹37,690 |
| 13 | Engineer Estimation (Civil) | Degree in Civil Engineering | 1 / 2 / 3 Years in Quantity Estimation, Measurements & Billing, Rate Analysis for Civil/RCC works | ₹35,520 – ₹37,690 |
| 14 | Deputy Manager Design (Process) | Degree in Chemical / Petrochemical / Chemical Technology / Polymer Technology | 5 Years in Process Design, PFDs, P&IDs — Oil & Gas / Fertiliser / CBG / Green Hydrogen | ₹40,000 |
| 15 | Deputy Manager (Design Piping) | Degree in Mechanical Engineering | 5 Years in Piping Layouts, Isometrics, MTO, ASME B31.3 | ₹40,000 |
| 16 | Deputy Manager (Design Mechanical) PCE | Degree in Mechanical Engineering | 5 Years in Design of Pressure Vessels, Storage Tanks, Heat Exchangers — ASME Sec VIII, API 650/620 | ₹40,000 |
| 17 | Deputy Manager Design (Electrical) | Degree in Electrical / Electrical & Electronics / Electrical & Instrumentation Engineering | 5 Years in EHV/HV Power Distribution Design, Transformers, DG Sets, UPS, Earthing, Lighting | ₹40,000 |
| 18 | Deputy Manager Design (Instrumentation) | Degree in Instrumentation / Instrumentation & Control / Electronics & Instrumentation | 5 Years in Instrumentation System Design — Field Instruments, Control Systems, Automation, BOQ | ₹40,000 |
| 19 | Deputy Manager Design (Civil) | Degree in Civil Engineering | 5 Years in Structural Design of RCC/Steel using STAAD-Pro or ETABS | ₹40,000 |
| 20 | Deputy Manager Estimation (Civil) | Degree in Civil Engineering | 5 Years in Quantity Estimation, Measurements & Billing, Rate Analysis for Civil/RCC works | ₹40,000 |
| 21 | Senior Manager Design (Process) | Degree in Chemical / Petrochemical / Chemical Technology / Polymer Technology | 8 / 10 Years in Process Design, PFDs, P&IDs — Fertiliser / Oil & Gas / CBG / Green Hydrogen | ₹43,720 – ₹46,400 |
| 22 | Senior Manager (Design Piping) | Degree in Mechanical Engineering | 8 / 10 Years in Piping Layouts, Isometrics, MTO, ASME B31.3 | ₹43,720 – ₹46,400 |
| 23 | Senior Manager (Design Mechanical) | Degree in Mechanical Engineering | 8 / 10 Years in Design Consultancy / EPC — Pumps, Compressors, Procurement Specs | ₹43,720 – ₹46,400 |
| 24 | Senior Manager Design (Electrical) | Degree in Electrical / Electrical & Electronics / Electrical & Instrumentation Engineering | 8 / 10 Years in EHV/HV Power Distribution Design, Transformers, Earthing, Lighting | ₹43,720 – ₹46,400 |
| 25 | Senior Manager Design (Instrumentation) | Degree in Instrumentation / Instrumentation & Control / Electronics & Instrumentation | 8 / 10 Years in Instrumentation Design — Field Instruments, Control Systems, Automation, BOQ | ₹43,720 – ₹46,400 |
| 26 | Senior Manager Design (Civil) | Degree in Civil Engineering | 8 / 10 Years in Structural Design of RCC/Steel using STAAD-Pro or ETABS | ₹43,720 – ₹46,400 |
| 27 | Senior Manager Estimation (Civil) | Degree in Civil Engineering | 8 / 10 Years in Quantity Estimation, Measurements & Billing, Rate Analysis for Civil/RCC works | ₹43,720 – ₹46,400 |
| 28 | Assistant General Manager Design (Process) | Degree in Chemical / Petrochemical / Chemical Technology / Polymer Technology | 12 / 15 Years in Process Design, PFDs, P&IDs — Fertiliser / Oil & Gas / CBG / Green Hydrogen | ₹49,240 – ₹53,820 |
| 29 | Assistant General Manager (Design Piping) | Degree in Mechanical Engineering | 12 / 15 Years in Piping Layouts, Isometrics, MTO, ASME B31.3 | ₹49,240 – ₹53,820 |
| 30 | Assistant General Manager (Design Mechanical) | Degree in Mechanical Engineering | 12 / 15 Years in Design Consultancy / EPC — Pumps, Compressors, Procurement Specs | ₹49,240 – ₹53,820 |
| 31 | Assistant General Manager Design (Electrical) | Degree in Electrical / Electrical & Electronics / Electrical & Instrumentation Engineering | 12 / 15 Years in EHV/HV Power Distribution Design, Transformers, Earthing, Lighting | ₹49,240 – ₹53,820 |
| 32 | Assistant General Manager Design (Instrumentation) | Degree in Instrumentation / Instrumentation & Control / Electronics & Instrumentation | 12 / 15 Years in Instrumentation Design — Field Instruments, Control Systems, Automation, BOQ | ₹49,240 – ₹53,820 |
| 33 | Assistant General Manager Design (Civil) | Degree in Civil Engineering | 12 / 15 Years in Structural Design of RCC/Steel using STAAD-Pro or ETABS | ₹49,240 – ₹53,820 |
| 34 | Assistant General Manager Estimation (Civil) | Degree in Civil Engineering | 12 / 15 Years in Quantity Estimation, Measurements & Billing, Rate Analysis for Civil/RCC works | ₹49,240 – ₹53,820 |
| Note: Exact vacancy count per post not specified — a panel is being prepared. Engagement from panel at Management's discretion based on project requirements. Candidates may apply for multiple experience levels per post by submitting separate applications. | ||||
Recruitment Table: Consolidated Pay Scale — Experience-wise Remuneration Table
| Post Level | Experience | Consolidated Pay (₹) | Maximum Consolidated Pay (₹) |
|---|---|---|---|
| Draughtsman | 1 Year | 25,750 | 32,660 |
| Draughtsman | 2 Years | 26,530 | 33,640 |
| Draughtsman | 3 Years | 27,330 | 34,650 |
| Draughtsman | 5 Years | 29,000 | 36,770 |
| Senior Draughtsman | 8 Years | 31,700 | 40,200 |
| Senior Draughtsman | 10 Years | 34,650 | 42,660 |
| Engineer Design / Estimation (Civil) | 1 Year | 35,520 | 44,400 |
| Engineer Design / Estimation (Civil) | 2 Years | 36,590 | 45,740 |
| Engineer Design / Estimation (Civil) | 3 Years | 37,690 | 47,120 |
| Deputy Manager Design / Estimation (Civil) | 5 Years | 40,000 | 50,000 |
| Senior Manager Design / Estimation (Civil) | 8 Years | 43,720 | 54,650 |
| Senior Manager Design / Estimation (Civil) | 10 Years | 46,400 | 57,980 |
| Assistant General Manager Design / Estimation (Civil) | 12 Years | 49,240 | 61,520 |
| Assistant General Manager Design / Estimation (Civil) | 15 Years | 53,820 | 67,240 |
| Note:Higher consolidated pay (3% per additional completed year of relevant experience over minimum) may be paid subject to maximum consolidated pay limit. Reservation applicable as per Government directives for UR/SC/ST/OBC/EWS. | |||
FACT FEDO Engineer Draughtsman Recruitment 2026Eligibility Criteria
- Draughtsman (Post Codes 1–5): Diploma in relevant Engineering discipline (Chemical / Mechanical / Electrical / Instrumentation / Civil / Architecture) from AICTE/UGC recognized institution. Minimum 1/2/3/5 years post-qualification experience in the relevant design/drafting field using AutoCAD/CAD software.
- Sr. Draughtsman (Post Code 6): Diploma in Civil Engineering / Architecture. Minimum 8/10 years experience in civil/structural drawing using CAD.
- Engineer Design (Post Codes 7–13): Degree (B.E./B.Tech.) in relevant Engineering discipline. Minimum 1/2/3 years post-qualification experience in design/engineering consultancy/EPC in the relevant discipline.
- Deputy Manager (Post Codes 14–20): Degree in relevant Engineering discipline. Minimum 5 years post-qualification experience in engineering design/consultancy/EPC.
- Senior Manager (Post Codes 21–27): Degree in relevant Engineering discipline. Minimum 8/10 years experience.
- Assistant General Manager (Post Codes 28–34): Degree in relevant Engineering discipline. Minimum 12/15 years experience.
- Only post-qualification experience counts. Apprenticeship training (1 year) acceptable as experience with Certificate of Proficiency (COP) from Board of Apprenticeship Training.
- Only full-time regular courses recognized by AICTE/UGC/AIU are accepted. Part-time, distance, correspondence, or private study qualifications are NOT considered.
- Age limit as on 01/05/2026: Draughtsman / Engineer / Deputy Manager (Post 1–5, 7–20) — max 35 years; Senior Draughtsman / Senior Manager (Post 6, 21–27) — max 45 years; AGM (Post 28–34) — max 50 years.
- Candidates willing to work at project site locations across India as required by FACT.
- Must be an Indian citizen. Pre-employment medical examination by FACT's Medical Officer is mandatory.
- Candidates holding dual specialization degrees — one specialization must be function-specific for the post applied.
FACT FEDO Engineer Draughtsman Recruitment 2026Pay Scale / Salary Structure
₹25,750–₹67,240/Month Consolidated (Based on Post & Experience)
FACT FEDO Engineer Draughtsman Recruitment 2026Selection Process Steps
- Draughtsman / Sr. Draughtsman (Post Codes 1–6): Skill Test in Engineering Drafting Software (practical/skill test). Candidates are ranked by marks scored in the skill test. Tie-breaking: (a) Completed years of relevant experience → (b) Earlier year of passing diploma → (c) Earlier date of birth.
- Engineer / Deputy Manager / Senior Manager / AGM (Post Codes 7–34): Selection based on marks scored in Interview.
- Shortlisting for skill test/interview at Management's discretion based on applications received.
- Pre-employment medical examination by FACT Medical Officer — clearance mandatory before appointment.
- Engagement from panel is at Management's discretion, subject to project requirements and reservation rules. Merit lists prepared separately for UR, SC, ST, OBC, and EWS categories.
FACT FEDO Engineer Draughtsman Recruitment 2026Detailed Exam Pattern
Recruitment Details: Selection Mode Overview
- Post Codes 1–6 (Draughtsman / Sr. Draughtsman): Practical Skill Test in Engineering Drafting Software (AutoCAD / CAD). Candidates ranked on marks scored in skill test.
- Post Codes 7–34 (Engineer / Deputy Manager / Senior Manager / AGM): Personal Interview — candidates ranked on interview performance.
- Negative Marking: No negative marking mentioned in official notification — this is a skill test / interview based selection.
- Shortlisting: Management reserves the right to shortlist candidates before skill test/interview.
- Tie-Breaking (Post Codes 1–6): (a) Completed years of relevant experience (b) Earlier year of passing Diploma (c) Earlier Date of Birth.
- Final Decision: Management's decision on mode of selection, eligibility, and shortlisting is final. No correspondence entertained.
- Medical: Pre-employment medical by FACT Medical Officer is mandatory. No relaxation in medical standards.
Recruitment Table: Job Profile by Post
| Post Name | Primary Responsibilities |
|---|---|
| Draughtsman (Chemical) | Prepare PFDs, P&IDs, and Process Specification drawings using AutoCAD for Fertiliser, Oil & Gas, Refinery, CBG, Green Hydrogen/Ammonia projects under FEDO's engineering design teams. |
| Draughtsman (Mechanical-Piping) | Draft piping layouts, key plans, isometric drawings, and bill of quantities using AutoCAD for Oil & Gas / Fertiliser / Chemical industry projects. 3D modeling using Cardworx plant software is desirable. |
| Draughtsman (Electrical) | Prepare single line diagrams, GA drawings of substation buildings, power layouts, earthing layouts, and lighting layouts using CAD software; prepare BOQ for erection tenders. |
| Draughtsman (Instrumentation) | Prepare engineering drawings for instrumentation systems using CAD software; prepare BOQ for erection tenders under engineering consultancy / EPC projects. |
| Draughtsman (Civil) / Sr. Draughtsman (Civil) | Prepare civil GA drawings and structural drawings of RCC and Steel structures using CAD software; senior role involves supervising junior draughtsmen and managing complex structural drawing packages. |
| Engineer Design (Process) | Process design and detailing engineering — prepare PFDs, P&IDs, and process specifications for Fertiliser, Refinery, Oil & Gas, Petrochemicals, CBG, Green Hydrogen / Green Ammonia projects. Proficient in process simulation software. |
| Engineer (Design Piping) | Develop piping layouts, equipment layouts, piping isometrics, and MTOs; prepare technical procurement specifications for piping materials; apply ASME Code B31.3 (Process Piping); review vendor documents. |
| Engineer (Design Mechanical) | Basic engineering of machinery — pumps, compressors, static equipment; finalize procurement specifications, tender documents, and BOQ; review vendor documents and drawings. |
| Engineer Design (Electrical) | Design EHV/HV power distribution systems; size transformers, DG sets, battery/charger systems, UPS, cables, capacitor banks; design earthing, lightning protection, lighting systems; prepare BOQ; review vendor drawings using AutoCAD. |
| Engineer Design (Instrumentation) | Design instrumentation systems including field instruments, control systems, automation projects; prepare BOQ and procurement specifications; review vendor drawings for instrumentation items and control systems. |
| Engineer Design (Civil) | Structural design of RCC and Steel structures using STAAD-Pro or ETABS; apply Indian Design Codes; post-graduation in Structural Design is desirable. |
| Engineer Estimation (Civil) | Quantity estimation, measurements and billing, specification preparation, and rate analysis for Civil and RCC works on FEDO project contracts. |
| Deputy / Senior Manager / AGM (All Disciplines) | Lead engineering design teams for their discipline; manage design deliverables, vendor coordination, procurement specifications, BOQ, and technical bid evaluations; mentor junior engineers; interface with clients and project management teams across FEDO projects. |
Recruitment Table: Application Submission — Two-Step Mandatory Process
| Step | Action | Deadline |
|---|---|---|
| Step 1 | Submit Online Form at www.fact.co.in → Careers → Job Openings → Recruitment Notification 01/2026. Upload signed Application Form (prescribed format) as PDF. | 21/05/2026 by 4:00 PM |
| Step 2 | Send original signed Application Form + all self-attested certificate copies by Speed Post / Registered Post to: DGM (HR), HR Department, FEDO Building, FACT, Udyogamandal, PIN – 683501. Envelope superscription: 'Application for the post of (Post Name) - Ad.01/2026'. | 28/05/2026 (receipt at FACT) |
| Note:BOTH steps are mandatory. Completing only one step disqualifies the application. | ||
FACT FEDO Engineer Draughtsman Recruitment 2026How to Apply
- Visit www.fact.co.in → Careers → Job Openings → Recruitment Notification 01/2026.
- Click the Online Registration link and fill in all details — personal, educational qualification, experience levels applied for (candidates can select multiple experience levels like 1, 2, 3, 5 years for the same post by submitting separate applications).
- Download the Application Form from the website, print it, fill manually in capital letters, affix passport-size photograph, and sign it.
- Upload the filled and signed Application Form as PDF in the Online Form.
- Submit the Online Form before 4:00 PM on 21/05/2026.
- Send the original signed Application Form along with self-attested copies of all documents by Speed Post / Registered Post to: DGM (HR), HR Department, FEDO Building, FACT, Udyogamandal, PIN – 683501.
- Write on the envelope: 'Application for the post of (Post Name) - Ad.01/2026'.
- Hard copy must reach FACT on or before 28/05/2026.
- For more than one post: Submit SEPARATE online applications and SEPARATE hard copies for each post.
- Check www.fact.co.in regularly for updates — individual communications may not be sent.
Recruitment Note: About The Fertilisers and Chemicals Travancore Limited (FACT)
The Fertilisers and Chemicals Travancore Limited (FACT) is a Schedule 'A' multi-divisional Central Public Sector Enterprise (PSE) under the Ministry of Chemicals and Fertilizers, Government of India, headquartered at Udyogamandal, Kochi, Kerala. Established in 1943, FACT is one of India's oldest and largest fertiliser manufacturers, producing complex fertilisers like Factamfos (NPK 20:20:0) and Ammonium Sulphate, as well as industrial chemicals including Caprolactam and Sulphuric Acid. FACT operates two manufacturing divisions — the Udyogamandal Division (UD) and the Cochin Division (CD) — along with FACT Engineering and Design Organisation (FEDO), a premier engineering consultancy arm offering design and consultancy services for fertiliser, petrochemical, oil & gas, and industrial infrastructure projects across India and internationally. FEDO provides EPCs, basic and detailed engineering, procurement, project management consultancy, and fabrication services, making it one of India's few vertically integrated fertiliser and engineering conglomerates.
Recruitment Note: Benefits & Perks Beyond Salary
Since this is a temporary contract engagement, standard permanent employee perks like HRA, LTA, and NPS/OPS pension do not apply. However, the following benefits are available based on eligibility as per FACT's company rules: Annual 3% increment on consolidated pay (subject to contract renewal), Provident Fund contributions, ESI coverage (if applicable) or Accident Insurance coverage, and TA/DA for official travel. The contract is for 1 year or till project completion, whichever is earlier, and is renewable at Management's discretion based on performance and project requirements. No terminal benefits are payable at the end of the contract. The engagement carries no right to permanent appointment or extension, and can be terminated by Management with 15 days' notice without assigning any reason.
Recruitment Note: Contract Terms & Important Notes
This engagement is purely on temporary contract basis for specific projects under FEDO or FACT. It does not confer any right for permanent appointment, regularization, or preferential treatment in future FACT recruitment. Candidates currently engaged in FACT as work-charged employees in a particular project are NOT eligible for this panel. Candidates must be willing to work at site locations based on project requirements. All disputes related to this recruitment will be settled in courts within the jurisdiction of Ernakulam, Kerala State. The company website (www.fact.co.in) is the only official source of updates — individual communications may not be sent to candidates.
FACT FEDO Engineer Draughtsman Recruitment 2026Important Official Links
| Apply Online Application Window: Till 21/05/2026 (4:00 PM) | Hard Copy by: 28/05/2026 | Click Here ↗ |
| Aapplication Form | Click Here ↗ |
| Download Notification Advt No. 01/2026 dated 07.05.2026 | Click Here ↗ |
| Official Website | Click Here ↗ |
Disclaimer Information provided here is for quick reference. Verify all details on the official website before taking action.
Quick Overview
🚀 Recruitment Overview
Quick Summary of the Notification
| Organization |  FACT |
|---|---|
| Post Name | Engineer / Draughtsman / Deputy & Senior Manager (FEDO) |
| Total Vacancy | 34 |
| Salary | ₹25,750–₹67,240/Month Consolidated (Based on Post & Experience) |
| Job Location | All India |
| Apply Mode | Online |
| Last Date | 21/05/2026 |
| Official Website | Visit Website ↗ |
💡 Expert Tip
FACT FEDO recruitment has a two-step mandatory process — online form submission AND physical hard copy dispatch. Many candidates lose out by doing only one: if you submit online without sending the signed hard copy by Registered/Speed Post (reaching FACT by 28 May 2026), your application is automatically rejected. Conversely, sending the hard copy without online form submission also disqualifies you. When writing on the envelope, write exactly: 'Application for the post of (Post Name) - Ad.01/2026'. Also note — only post-qualification experience is counted. Apprenticeship training (1 year) is accepted as experience only with a Certificate of Proficiency (COP) from the Board of Apprenticeship Training. Part-time, distance, or correspondence qualifications are not accepted under any circumstance.
Common Questions (FAQs)
Q.1 What is the in-hand salary for Engineer Design posts at FACT FEDO 2026? ▼
Ans: Engineer Design posts (Post Codes 7–13) carry consolidated pay of ₹35,520/month (1-year experience), ₹36,590/month (2 years), and ₹37,690/month (3 years). This is the full consolidated take-home — no DA/HRA is separately added. Maximum consolidated pay is ₹44,400–₹47,120 for engineers. Deputy Managers get ₹40,000/month (max ₹50,000), Senior Managers ₹43,720–₹46,400/month, and AGMs ₹49,240–₹53,820/month. An annual 3% increment applies on contract renewal.
Q.2 What is the last date to apply for FACT FEDO Recruitment 2026? ▼
Ans: The last date to submit the Online Form at www.fact.co.in is 21 May 2026 by 4:00 PM. After online submission, the original signed Application Form with all self-attested certificates must reach DGM (HR), FEDO Building, FACT, Udyogamandal, PIN-683501 by 28 May 2026 via Speed Post/Registered Post. Both steps are mandatory — completing only one will result in rejection.
Q.3 Is there any negative marking or written exam in FACT FEDO Recruitment 2026? ▼
Ans: No negative marking is mentioned in the official notification. There is no written exam. For Draughtsman posts (Post Codes 1–6), selection is via a Practical Skill Test in Engineering Drafting Software (AutoCAD/CAD), with candidates ranked by marks scored. For Engineer to AGM level posts (Post Codes 7–34), selection is based solely on marks scored in a Personal Interview. The skill test and interview dates will be communicated separately.
Q.4 What is the age limit for FACT FEDO Contract Recruitment 2026? ▼
Ans: Age limits as on 01/05/2026: Draughtsman, Engineer Design, and Deputy Manager posts (Post Codes 1–5 and 7–20) — maximum 35 years (born between 01.05.1991 and 30.04.2008). Senior Draughtsman and Senior Manager posts (Post Codes 6 and 21–27) — maximum 45 years. Assistant General Manager posts (Post Codes 28–34) — maximum 50 years. Age relaxation as per Government directives for SC/ST/OBC/EWS/PwBD reserved posts.
Q.5 How to download the FACT FEDO Notification PDF? ▼
Ans: Visit www.fact.co.in and navigate to Careers → Job Openings → Recruitment Notification 01/2026. The 14-page notification along with the prescribed Application Form format are available for download. Read the notification thoroughly before applying — pay special attention to the two-step mandatory application process (online + hard copy by post). Check the website regularly for skill test/interview schedule updates.
Q.6 What is the educational qualification for FACT FEDO Engineer posts? ▼
Ans: Engineer Design posts (Post Codes 7–13) require a full-time regular B.E./B.Tech. degree in the relevant engineering discipline (Chemical/Mechanical/Electrical/Instrumentation/Civil) from AICTE/UGC recognized institution. Part-time, distance, correspondence, or private study qualifications are NOT accepted. Candidates with 5-year BE/B.Tech. + ME/M.Tech. integrated dual degree are also eligible. Minimum 1/2/3 years post-qualification experience in engineering consultancy/EPC/design is required.
Q.7 What is the selection process for FACT FEDO Recruitment 2026? ▼
Ans: Two different processes apply: (1) Draughtsman / Sr. Draughtsman (Post Codes 1–6): Practical Skill Test in Engineering Drafting Software. Ranked on marks scored. Tie-breaking by years of experience, then year of diploma, then date of birth. (2) Engineer / Deputy Manager / Senior Manager / AGM (Post Codes 7–34): Personal Interview. Ranked on interview marks. Pre-employment medical examination is mandatory for all selected candidates. Final engagement is at Management's discretion based on project requirements.
Q.8 Can candidates apply for multiple posts or multiple experience levels in FACT FEDO 2026? ▼
Ans: Yes — candidates can apply for more than one post and/or more than one experience level (e.g., both 3-year and 5-year experience categories for the same post). However, each post and each experience level requires a SEPARATE online application and a SEPARATE hard copy with documents sent to FACT. Candidates must indicate their preferred experience level(s) clearly in the application — they will only be considered for the experience levels they have specified and supported with documents.
More Related Updates
👉 NVS Lucknow Teacher & Nurse Recruitment 2026
📅 Posted: 09/05/2026
👉 NCDC Young Professional Recruitment 2026
📅 Posted: 20/04/2026
👉 HKRNL Nurse Recruitment 2026
📅 Posted: 18/04/2026
👉 NEPA Limited Various Posts Recruitment 2026
📅 Posted: 17/04/2026
👉 MBMC Various Posts 2026
📅 Posted: 16/04/2026
👉 ECHS Polyclinic Rajasthan Recruitment 2026
📅 Posted: 15/04/2026